Shop Now
Grade 1 = Styrene Butadiene Rubber (SBR)
Grade 2 = Chloroprene Rubber (CR)
Laminated with 100% Nylon Jersey
See Test Reports, below
NONE
NONE: Material is not hazardous
The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results and assume no liability for damages incurred by the use of this material. All materials may present unknown health hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Final determination of suitability of this material is the sole responsibility of the user. No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or any other nature are made hereafter with respects to the information contained herein or the material to which the information refers. It is the responsibility of the user to comply with all applicable federal, state, and local laws and regulations.
| Property / Article | CR | CS | SBR |
|---|---|---|---|
Elongation, Break (%) (min) | 400 | 350 | 300 |
Tensile Strength (kg/sg. cm) (min) | 7.0 | 5.0 | 5.0 |
Tear Strength (kg/sg. cm) (min) | 2 | 2 | 2 |
Hardness (Type C) | 4–6 degrees | 4–6/6–8 degrees | 6–8 degrees |
Density (G/cubic cm.) | 0.18–0.2 | 0.16–0.18 | 0.2+/-0.02 |
Modulus at 200% Elongation (kg/sq. cm.) | 2–3 | 2–3 | 4–5 |
Water Absortion By Weight (%) (max) | 1 | 1 | 1 |
Shrinkage (70 degrees C., 24hrs.) (max) | 2 | 2 | 2 |
Compression Set (Compressed 50%, 25 degrees C) | 15–25 | 15–25 | 15–25 |
